Samsung Series 4000 Flat Panel Television User Manual


 
20
English
Basic Features
SLEEP
Clock Set: Set Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Manual directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
This function is only available when the
Clock Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the
Clock Mode is set to Auto.
Using the Sleep Timer
MENU
Setup Time Sleep
Timer ENTER
Sleep Timer
: Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the Sleep Timer, select Off.
Setting the On / Off Timer
MENU
Setup Time Timer 1
ENTER
Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
x
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
x
When there is only one photo file in the USB,
the Slide Show will not play.
x
If a folder name is too long, the folder cannot be
selected.
x
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The
mark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by
the Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
Locking Programs
MENU
Setup Security ENTER
Security
The PIN input screen appears, Enter your 4 digit PIN number.
V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
NOTE
x
V-Chip is not available in HDMI, Component
or PC mode.
x
The default PIN number of a new TV set is
“0-0-0-0”.
x
Allow All: Press to unlock all TV ratings.
x
Block All: Press to lock all TV ratings.
20 TV Cable 1
00 00 am
00 00 am
Timer 1
On Time
Off Time
Volume
Inactivate
Inactivate
Sun Mon Tue Wed Thu Fri Sat
Once
Source Antenna Channel
Repeat
Move
Adjust 
Enter

Return
[UC400019-Canada]BN68-02624B-04L02.indb 20 2010-07-09 오후 3:24:11