Filter
Top Products
English - 25
Setting the Channel Mode
You can display either the added channels list or the favourite channels list when the CH LIST button on the remote control
is pressed.
1. Press the
MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2. Press the ▲ or ▼ button to select “Channel Mode”, then press the
ENTER
button.
3. Press the ▲ or ▼ button to select “Added Ch.” or “Favourite Ch.”.
Press the
ENTER button.
4. Press the EXIT button to exit.
Fine Tuning Analogue Channels
1. Use the number buttons to directly select the channel that you want to ne
tune.
2. Press the
MENU button to display the menu. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “Fine
Tune”, then press the ENTER
button.
4. Press the ◄ or ► button to adjust the ne tuning. Press the ENTER
button.
5. Press the
EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*”
on the right-hand side of the channel number in the channel banner.
To reset the ne-tuning, select “Reset” by pressing the ▲ or ▼ button and
then press the ENTER
button.
Only Analogue TV channels can be ne tuned.
➣
➣
➣
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
►
Fine Tune
Signal Information
LNA : Of
f
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.►
Fine Tune
Signal Information
LNA : Of
f
Added Ch.
Favourite Ch.
Channel
Channel List
Channel Mode : Added Ch.
FineTune ►
Signal Information
LNA : Off
Fine Tune
ATV 6 * Fine Tuned
Reset
ReturnSave
Move
Adjust
+ 3
BN68-01409L-00Eng.indb 25 2008-08-14 �� 8:39:46