Samsung SHR-1041 DVR User Manual


 
English _37
SETTINGS
HDD EVENT
In the <SYSTEM SETUP> window, use the direction
buttons (
$%_+
/ENTER) to select <EVENT/SENSOR>.
Select <HDD EVENT> and use the up/down buttons
(
$%
/ ENTER) to set a desired item.
DISK FULL EVENT : You can set to notify the user when
the HDD is full.
- This is applied only if you have set <OVERWRITE> in
<DISK MANAGEMENT> to <OFF>.
When your settings are completed, click <APPLY> on the
bottom.
Your settings will be applied.
ALARM INPUT
In the <SYSTEM SETUP> window, use the direction buttons ($%_+/ENTER) to select <EVENT/
SENSOR>.
Select <ALARM INPUT> and use the direction buttons
($%_+/ENTER) to set a desired item.
OPERATION : Set the connection status of the alarm
sensor to either ENABLE or DISABLE.
- If the alarm sensor is set to <ENABLE> and you have
set to perform recording if an alarm occurs, the Live
screen displays the alarm recording standby mode.
(Page 18)
- The INPUT type of the alarm is N/O(Normal Open).
When your settings are completed, click <APPLY> on the
bottom.
Your settings will be applied.
ALARM OUTPUT
In the <SYSTEM SETUP> window, use the direction
buttons ($%_+/ENTER) to select <EVENT/SENSOR>.
Select <ALARM OUTPUT> and use the direction buttons
($%_+/ENTER) to select and set a desired item.
OPERATION : Set the operation of the alarm output.
- If set to <ENABLE>, the applicable menu is activated
where you can set other options.
- If set to <DISABLE>, other items will be disabled.
MODE : Set the output mode of the alarm.
- If set to <LATCHED>, the alarm will sound for as much
time as defi ned in DURATION.
- If set to <TRANSPARENT>, the DURATION item will be disabled.
HDD EVENT : Set to use the alarm output if the HDD is full.
DURATION : Set the duration of the alarm output.
- If you select <Until>, the buzzer will be stopped when you press any button on the front panel or the
remote control.
ALARM, VIDEO LOSS, MOTION : Set the alarm output for each channel if an event of alarm, video
loss or motion detection occurs.
When your settings are completed, click <APPLY> on the bottom.
Your settings will be applied.
3.
4.
5.
3.
4.
5.
3.
4.
5.
CAM1 CAM1
CAM1 CAM1
EVENT/SENSOR
HDD
EVENT
ALARM
INPUT
APPLY UNDO
ALARM
OUTPUT
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
DISK FULL EVENT ON
CAM1 CAM1
CAM1 CAM1
EVENT/SENSOR
HDD
EVENT
ALARM
INPUT
APPLY UNDO
ALARM
OUTPUT
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
OPERATION
1
DISABLE
2
DISABLE
3
DISABLE
4
DISABLE
CAM1 CAM1
CAM1
CAM1
EVENT/SENSOR
HDD
EVENT
ALARM
INPUT
APPLY UNDO
ALARM
OUTPUT
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
ALARM
DISABLE
1
2
3
4
OPERATION
MODE
LATCHED
ON
HDD EVENT
DURATION
5 SEC
VIDEO LOSS MOTION
02235A_SHR-1041K_ENG.indb 37 2009-02-17 오전 10:51:05