Filter
Top Products
20
OPERATION
Chapter Three
OPERATION
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Viewing the Menus and On-Screen Displays
Viewing the Menus
Viewing the Display
▼
The on-screen displays
disappear after about ten seconds.
When Closed Caption has been set,
the icon( ) will appear by press-
ing the
INFO button.
▼
1
With the power on, press
the MENU button.
The main menu appears
on the screen. Its left side
has four icons: Picture,
Sound, Channel and
Function.
The on-screen menus disappear from
the screen after about two minutes.
▼
You can also use the MENU,
CHANNEL and VOLUME buttons
on the control panel of the TV to
make selections.
1
Press the INFO button.
on the remote control.
The on-screen display
shows any or all of the
following: Active channel,
picture mode, audio mode,
audio source and the time.
(“*” indicates a channel
has been manually fine
tuned.)
2
Use the ▲ and ▼ buttons to highlight one of the 4 icons.
Then press the
ˆ
button to access the icon’s sub-menu.
Press the EXIT button to exit.
ANT 11
*
Signal : Mono
Picture : Dynamic
Sound : Custom
MTS : Stereo
- - : - - am
Mode
ˇˇ
Dynamic
ˆˆ
Adjust
ˆˆ
Color Tone : Cool
Size : Normal
Picture
Move Select Exit