Filter
Top Products
3.6 CHAPTER THREE: TV OPERATION
OPERATION
3
Press the VOL + button.
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the MENU
button twice to exit.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the memorization process and return
to the Channel menu.
2
Press the CH ▼ button to
select “Auto program”.
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~4
on previous page.
Press the MENU button,
then press the CH ▼ but-
ton twice to select
“Channel.”
Press the VOL + button to
access the Channel sub-
menu.
Note: Channel auto program does not function when the
V-chip is active.