Filter
Top Products
Connecting a PC (Personal computer)
Use the INPUT5 (PC) terminals to connect a PC.
• The PC input terminals are DDC1/2B-compatible.
• Refer to "PC compatibility chart" for a list of PC signals compatible with the System.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before
connecting with the PC. (See page 23.)
• Depending on the PC being used, images may not be shown without converting the output signals into external output.
Please refer to your PC's manuals regarding converting to external output.
J
• Connect the RGBcablemakingsure
that itfitscorrectlyinto theterminal.
J
Then, firmlysecurethe connectorsby
tightening thescrewson bothsides
of theplug.
PC
To ANALOG RGB]
output terminal j ltermina_ j
_ (.... RGBal_ylleailable) V
<
3.5 mm stereo minijack cable
_tput _ (....... ialiy avalable)_DI_
i
]
Signal names for 15-pin mini D-sub connecter
Pin No. Signal name Pin No. Signal name
O R O +5V
(_) G _) GND (Ground)
O B @ Not connected
(_ Not connected @ SDA
O CSYNC @ HD
(_) GND (Ground) _) VD
0 GND (Ground) (_) SCL
(_) GND (Ground)
• Pin No. 5 is not used for inputting the signal.
• Pin No. 9 is not connected with the supplied RGB cable.
To view an image from a PC, perform the following
procedure.
O Select the tnput5 (PC) mode using INPUT on the remote
control or the TV/DVD set. (See page 14.)
(_)Select the PC input signal.
G Adjust the "Picture." items ifthe PC image does not come
in clearly. (See page 23.)
(_ - 24
31.5 60
640 x400
37.9 85
31.5 60
720 x400 31.5 70
VGA 37.9 85
31.5 60
37.9 72
640 x480
37.5 75
43.3 85
WVGA 848 x 480 31.0 60
35.1 56
37.9 60
PC
SVGA 800 x600 48.1 72
46.9 75
53.7 85
48.4 60
56.5 70
XGA 1,024 x 788
60.0 75
68.7 85
1,280 x 720 44.8 60
47.8 60
WXGA 1,280 x 788
48.1 60
1,360 x 788 47.7 60
SXGA 1,280 x 1,024 64.0 60
MAC 13" VGA 640 x 480 34.9 67
MAC 16" SVGA 832 x624 49.7 75
MAC 19" XGA 1,024 x 788 60.2 75
,/
,/
50Q0131A Eindb 24 3/3/2008 1:43:31 PM