Filter
Top Products
21
E
ENGLISH
Switching the screen size
Switching the screen size (When the input mode is DIGITAL/ANALOG)
Even when the screen size is changed, the display may remain the same depending on the input signal.
WIDE ZOOM 1 ZOOM 2
DotbyDot
NORMAL
An image with a 4:3 aspect ratio is
enlarged to fill the entire screen
without changing the aspect ratio. The
edges of the image may be cut off.
Displays image so it fills the
entire screen.
Use this size if ZOOM 1 cuts
off the subtitles.
Displays image so it fills the
screen without changing the
aspect ratio of the input
signals.
Displays the dots of the signals
input from the connected PC as
the corresponding dots on the
screen. *
MODE (Screen mode selection)
Each time you press this button, the screen mode changes in the following
order:
•
STD (Standard)
→
OFFICE
*1
→
VIVID
→ sRGB *2
→
STD...
*1 Display brightness is lowered. (This mode saves power.)
*2 When the input mode is DIGITAL/ANALOG.
sRGB is international standard of color representation specifi ed by IEC
(International Electrotechnical Commission).
Color conversion is made in taking account of liquid crytal’s characteristics and
represents color tone close to its original image.
DISPLAY
Displays monitor information. The display disappears when this button is
pressed again or disappears automatically after approximately 15 seconds.
INPUT MODE
SIZE
MODE
BRIGHT
VOLUME
OFF TIMER
ID No.
MODEL
S/N
ANALOG
WIDE
OFFICE
23
15
10:38
18
PN-655RU
XXXXXXXXX
:
:
:
:
:
:
:
:
:
1920x1080
INFORMATION ANALOG
V: 60 Hz H: 66.3 kHz
* With a monitor with a screen
resolution of 1600 x 1200,
selecting DotbyDot displays the
NORMAL screen.
Basic Operation