Filter
Top Products
42
E
RS-232C command table
<How to read the command table>
Command: Command fi eld (See page 35.)
Direction: W When the “Parameter” is set in the parameter fi eld (see page 35), the
command functions as described under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting
“????”, “
?” or “???+” (repeater control) in the parameter fi eld (see
page 35).
Parameter: Parameter fi eld (See page 35.)
Reply: Response (Returned value)
* “Yes” indicates commands which can be used in power standby mode.
Power control/Input mode selection
Control item
Command Direction
Parameter
Reply Control/Response contents
*
POWER CONTROL POWR W
0 Switches to standby mode.
Yes
1 Returns from standby mode.
R
0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION INPS W
0 Toggle change for input mode
Yes
1 PC digital RGB (DVI) (DIGITAL)
2 PC analog RGB (ANALOG)
3 Component (COMPONENT)
4VIDEO
R
1 PC digital RGB (DVI) (DIGITAL)
2 PC analog RGB (ANALOG)
3 Component (COMPONENT)
4VIDEO
Controlling the Monitor with a PC