Sharp XG-C330X Projection Television User Manual


 
-36
Displaying and Setting the
Break Timer
This function allows you to show the remaining
time for break during meeting.
1 Press BREAK TIMER. The break
timer starts to count down from 5
minutes.
2 When “ is displayed, press
''
''
' ,
""
""
" ,
\\
\\
\ or
||
||
| to set the break timer.
You can set anywhere between 1 and 60
minutes (in 1 minute units).
3 Press BREAK TIMER to cancel
the break timer.
MOUSE/Adjustment
buttons ('/"/\/|)
PICTURE MODE
button
BREAK TIMER
button
RETURN button
ECO/QUIET button
"On-screen Display
Switching the Eco/Quiet
Mode
Press ECO/QUIET on the remote control or ECO/
QUIET on the projector to switch the Eco/Quiet mode
between on and off.
When the Eco/Quiet Mode is set to “On”, the sound
of the cooling fan will turn down, the power con-
sumption will decrease, and the lamp life will ex-
tend. (Projection brightness decreases 20%.)
Selecting the Picture Mode
You can select the suitable picture mode for the
projected image, such as movie or video game.
Press PICTURE MODE on the remote
control.
When pressing PICTURE MODE, the picture
mode changes in order of:
Note
“sRGB” is displayed only when RGB signal is
input.
Press
RETURN to return to the “STANDARD”
mode while “Picture Mode” is displayed on the
screen.
STANDARD PRESENTATION MOVIE GAME sRGB
Brightness
80%
100%
On
Off
Power consumption
(When using AC 100V)
300 W
360 W
Lamp life
Approx.
3,000 hours
Approx.
2,000 hours
Image Projection