Filter
Top Products
WA503 SINGLE RACK, FRONT–MOUNT ANTENNA CONVERSION KIT
Bracket Installation
1. Remove the screws from each side
of the receiver. See Figure 1.
RECEIVER
(TOP VIEW)
FIGURE 1
FRONT
2. Secure the brackets (not supplied
with the WA503 kit) to the sides of
the receiver with the screws re-
moved in Step 1. See Figure 2.
BRACKET BRACKET
RECEIVER
(TOP VIEW)
FIGURE 2
FRONT
NOTE: There are four holes in each
bracket. Use the rear holes if the re-
ceiver is to be recessed; use the front
holes to mount it flush to the rack.
WA503 Adapter & Cable Installation
1. Insert the WA503 adapters through
the holes in each bracket, and se-
cure them from each side, using the
attaching hardware. See Figure 3.
WA503
ADAPTER
RECEIVER
(TOP VIEW)
WA503
ADAPTER
FIGURE 3
FRONT
2. Connect the supplied antenna cables
to the receiver antenna inputs and
WA503 adapters. See Figure 4.
RECEIVER
(TOP VIEW)
FIGURE 4
ANTENNA
CABLE
ANTENNA
CABLE
FRONT
3. Screw the antennas into the bulk-
head adaptors protruding through
the front panel. See Figure 5.
ANTENNA ANTENNA
RECEIVER
(TOP VIEW)
FIGURE 5
FRONT
4. Insert the receiver into the equip-
ment rack and secure the brackets
to the rack with the supplied screws.
See Figure 6.
EQUIPMENT RACK
FIGURE 6
NOTE: For more information, call
Shure Customer Service at
1–847–600–2000.
Model WA503 Instruction Sheet
27B8445 (Rev. 3)
©2006, Shure Incorporated
Printed U.S.A.