Sim2 Multimedia HT500 E-LINK Projection Television User Manual


  Open as PDF
of 12
 
SIM2 HT500 E-LINK
RS-232C CONTROL SPECIFICATIONS
11
SET YCrCb
AutoSync
BE EF 03 19 00 49 D2 01 85 08 00 00 00 00 00 00
17 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SET YCrCb 15kHz
BE EF 03 19 00 80 DA 01 85 08 00 00 00 00 00 00
0B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SET YCrCb 32kHz
BE EF 03 19 00 8A D0 01 85 08 00 00 00 00 00 00
13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SET RGB AutoSync
BE EF 03 19 00 4C D7 01 85 08 00 00 00 00 00 00
1B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SET RGB 15kHz
BE EF 03 19 00 85 DF 01 85 08 00 00 00 00 00 00
07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
INPUT 8
(COMP RGB 4) /
SIGNAL TYPE
SET RGB 32kHz
BE EF 03 19 00 43 D8 01 85 08 00 00 00 00 00 00
0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
RECALL
BE EF 03 19 00 85 EB 01 27 09 00 00 01 00 00 00
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SAVE CURRENT
SETTINGS
BE EF 03 19 00 54 D6 01 27 09 00 00 00 00 00 00
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
MEMORY 1
SAVE INITIAL
SETTINGS
BE EF 03 19 00 45 9A 01 28 09 00 00 01 00 00 00
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
RECALL
BE EF 03 19 00 74 AB 01 27 09 00 00 01 00 00 00
02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SAVE CURRENT
SETTINGS
BE EF 03 19 00 A5 96 01 27 09 00 00 00 00 00 00
02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
MEMORY 2
SAVE INITIAL
SETTINGS
BE EF 03 19 00 76 DE 01 28 09 00 00 02 00 00 00
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
RECALL
BE EF 03 19 00 E4 6A 01 27 09 00 00 01 00 00 00
03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SAVE CURRENT
SETTINGS
BE EF 03 19 00 35 57 01 27 09 00 00 00 00 00 00
03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
MEMORY 3
SAVE INITIAL
SETTINGS
BE EF 03 19 00 A7 E3 01 28 09 00 00 03 00 00 00
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5. Examples
1. Send the simulated "SWITCH ON FROM STAND-BY AND SELECT SOURCE" Remote Control
keycode.
Remote Control allows Switching on from Stand-by via one of the keys "1", "2" ... "11", "12".
Send, for instance, the code relative to key "1": BEEF02060080E5490100000000.
The projector switches on and selects Input 1.
The projector returns the response code: 06 (Acknowledged with no error).
NOTE: Commands that simulate keys "1", "2" ... "11", "12" switch on the unit and select the
corresponding Source.
Command that simulate key 0 switches on the unit: the last source memorised prior to switch off is
automatically selected.
2. Send the simulated "MENU RIGHT" Remote Control keycode.
Send the packet: BEEF02060023E75A0100000000.
The OnScreen Display appers on the screen.
The projector returns the response code: 06 (Acknowledged with no error).
3. Send the "SET ASPECT ANAMORPHIC" Operation Code.
Send the packet: BEEF0206009DF5840100000000.
 previous