Filter
Top Products
Step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and - on the batteries
to the diagram inside the battery
compartment.
Insert the negative (-) end first, then
push in and down until the positive (+)
end clicks into position.
Using the remote commander
Remote sensor
You can use this remote
commander to operate this VCR
and a Sony TV or AV receiver.
Buttons on the remote
commander marked with a dot
can be used to operate your
Sony TV.
The RECEIVER VOL +/- and
MUTING buttons can be used to
operate your Sony AV receiver.
To operate
Set TV / RECEIVER / VIDEO to
the VCR VIDEO and point at the remote sensor on the VCR
a Sony TV or TV / RECEIVER and point at the remote sensor on the TV
AV receiver or AV receiver
Notes
* With normal use, the batteries should last about three to six months.
* If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
* Do not use a new battery with an old one.
* Do not use different types of batteries.
* Some Sony AV receivers may not be operated with the remote
commander.
continued
Getting Started
5
TV RECEIVER
/ VIDEO
RECEIVER
VOL +/-
MUTING