Sony DSR-70 DVD Recorder User Manual


 
Chapter 7 Setup Menu
Chapter 7 Setup Menu 107
Item number Item name Settings
125 AUTO REW Select whether to rewind the tape automatically when recording or playback reaches the
end of a tape.
DIS: Do not rewind the tape automatically.
ENA: Rewind the tape automatically.
128 PAUSE
FUNCTION
Select whether to use the search button as a pause button.
OFF: Do not use as a pause button.
ON: Use as a pause button.
Item number Item name Settings
201 PARA RUN Select whether or not to use synchronized operation for two or more VTRs.
DIS: No synchronized operation.
ENA: Use synchronized operation.
Note
To use synchronized operation for two or more VTRs, set item 201 to ENA on all of the
VTRs.
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
305 SYNC GRADE When editing in phase-synchronized mode with item 004 set to ON, select the target
phase synchronization accuracy.
ACCUR: ±0 frame accuracy.
ROUGH: ±1 frame accuracy.
Menu items in the 300s, relating to editing operations
307 AUTO-DELETION
FOR
INCONSISTENT
DATA
Select what happens when an erroneous edit point is set.
MANU: A warning is given by flashing the DELETE button on the control panel.
The operator must manually delete the unnecessary edit point .
NEG&E: When inconsistent edit points are set, such as when an OUT point is before an
IN (or audio IN) point, or when too many edit points are specified, the previously set edit
point is deleted.
NEG: When inconsistent edit points are set, such as when an OUT point is before an IN
(or audio IN) point, the previously set edit point is deleted. When too many edit points
are specified, the DELETE button on the control panel flashes to give a warning.
Note
Pressing the button corresponding to an edit point to be deleted and the DELETE button
simultaneously deletes the edit point. If an erroneous edit point is set (the DELETE
button is flashing), editing is not executed.
Menu items in the 100s, relating to the control panels (continued)
129 CLIPLINK Select whether to create ClipLink log data.
OFF: Do not create.
ON: Create.
When recording, the recording starting point is made a Mark IN point and the recording
ending point is made a Mark OUT point. When editing, the edit IN point (the video IN
point or audio IN point whichever coming first) is made a Mark IN point and the edit OUT
point is made a Mark OUT point.
Note
If recording or editing is carried out when this item is set to OFF, the existing ClipLink
log data is erased.
(Continued)