Filter
Top Products
Chapter 8 Connections and Settings
116 Chapter 8 Connections and Settings
Settings on Editing Control Units
Make the following settings according to the editor
model.
For FXE-100/120 (NTSC)
Set the VCR constants as follows.
For FXE-100P/120P (PAL)
Set the VCR constants as follows.
For BVE-910/2000
Set the VCR constants as follows.
• When using the DSR-70 (NTSC)
• When using the DSR-70P (PAL)
For RM-450 (NTSC)
Set the VCR constants as follows.
• Left DIP switch
• Right DIP switch
Settings Required When Connecting an External Editing Control Unit
Byte No.
123456789
10 11 12 13 14 15
Setting 80 13 00 96 05 05 03 80 0A 08 FE 00 80 5A FF
Byte No.
123456789
10 11 12 13 14 15
Setting 81 13 00 7D 05 05 02 80 0A 07 FE 00 80 4C FF
Byte No.
Block 1 Block 2
123456789
10 11 12 13 14 15
Setting 80 13 00 96 05 05 03 80 0A 08 FE 00 80 5A FF
Byte No.
Block 1 Block 2
123456789
10 11 12 13 14 15
Setting 81 13 00 7D 05 05 02 80 0A 07 FE 00 80 4C FF
Switch No.
76543210
Setting OFF — — OFF — — — —
Switch No.
76543210
Setting OFF — OFF ON OFF OFF ON ON
For RM-450CE (PAL)
Set the VCR constants as follows.
• Left DIP switch
• Right DIP switch
For BVE-800
Set the VCR constants as follows.
When using the DSR-70 (NTSC)
• SW2
• SW3
When using the DSR-70P (PAL)
• SW2
• SW3
For PVE-500
Use the factory settings as they are.
Switch No.
76543210
Setting OFF — — OFF — — — —
Switch No.
76543210
Setting ON — OFF ON OFF OFF ON ON
Switch No.
12345678
Setting ON OFF ON ON — ON ON —
Switch No.
12345678
Setting OFF ON OFF ON — ON OFF OFF
Switch No.
12345678
Setting ON OFF ON ON — ON ON —
Switch No.
12345678
Setting ON ON OFF ON — ON OFF OFF