Sony DSR-70P DVD Recorder User Manual


 
Chapter 7 Setup Menu
Chapter 7 Setup Menu 109
Item number Item name Settings
605 TCG REGEN
MODE
Select the signal to be regenerated when the time code generator is in the regeneration
mode (i.e., when the PRESET/REGEN item in the sub LCD menu general settings page
is set to REGEN, or the unit is in automatic edit mode).
TC&UB: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.
Menu items in the 600s, relating to the time code generator
607 U-BIT BINARY
GROUP FLAG
610 REGEN
CONTROL MODE
When editing with two DSR-70/70P units, if you use the control panel for editing
operation, select whether or not the timecode is automatically regenerated.
AS&IN: In editing with this unit as the recorder, regardless of the settings of the TC INT/
EXT switch and sub LCD menu item PRESET/REGEN, in assemble and insert editing ,
the timecode generator regenerates according to the timecode on the tape.
ASSEM: In editing with this unit as the recorder, regardless of the settings of the TC
INT/EXT switch and sub LCD menu item PRESET/REGEN, in assemble editing only,
the timecode generator regenerates according to the timecode on the tape.
MANU: Regardless of whether this unit is the recorder or player, the timecode
generator operates in accordance with the settings of the TC INT/EXT switch and sub
LCD menu item PRESET/REGEN.
FULL: Regardless of the REMOTE/LOCAL switch setting, when any of the ASSEMBLE,
VIDEO, AUDIO CH1,1/2, AUDIO CH2,3/4, and TC buttons is lit, the timecode generator
regenerates according to the timecode played back from the tape.
611 TC OUTPUT
PHASE IN EE
MODE
Select the timecode output mode for output from the TC OUT connector in E-E mode.
MUTE: Mute the output.
THRU: Output the timecode input to the TC IN connector as it is.
V-IN: Output the timecode with the same phase as the input video signal phase.
V-OUT: Output the timecode with the same phase as the output video signal phase.
612 TC OUTPUT
MUTE IN
SEARCH MODE
Select whether to mute the output from the TC OUT connector in search (jog/shuttle)
mode.
ON: Mute.
OFF: Do not mute.
Select the user bits to be used in the time code generated by the time code generator.
000: Character set not specified.
001: 8-bit characters compliant with ISO 646 and ISO 2022.
010: Undefined.
011: Undefined.
100: Undefined.
101: SMPTE 262M page/line multiplex system.
110: Undefined.
111: Undefined.