Filter
Top Products
Chapter 8 Connections and Settings
114 Chapter 8 Connections and Settings
Connections for Digital Nonlinear Editing Using
SDTI (QSDI) Interface (Optional DSBK-150 Required)
This unit can be connected to an ES-7 EditStation to
configure a digital non-linear editing system. Using the
SDTI (QSDI) interface, you can transfer video, audio,
timecode, and other compressed data between this unit
and the ES-7.
The unit supports ClipLink functions, enabling index
pictures recorded on tape and ClipLink log data stored
in cassette memory to be transferred to the ES-7 in an
instant.
For an overview of the ClipLink function, refer to the
separate ClipLink Guide.
The following is a connection diagram for digital non-
linear editing system in which this unit serves as the
recorder.
For connections of the ES-7’s peripheral devices (the
control panel, the disk unit, etc.) and the player, refer
to your ES-7 Operating Instructions.
Note
In this case, the DSBK-150 SDTI (QSDI) Iuput/Output
Board is required.
REF. VIDEO IN
REMOTE
STDI(QSDI) IN
STDI(QSDI) OUT
BB OUT
RECORDER
QSDI OUTPUT
QSDI INPUT
ES-7
DSR-70/70P (recorder)
1
2
1
1
Settings on the DSR-70/70P
Switch
REMOTE/LOCAL
REF. VIDEO IN 75Ω termination
Setting
REMOTE
ON
1 75 Ω coaxial cable (not supplied)
2 RCC-5G/10G/30G 9-pin remote control cable
(length 5 m (16 ft)/10 m (33 ft)/30 m (98 ft), not
supplied)