Filter
Top Products
Location and Function of Parts
Chapter 1 Overview
12 Chapter 1 Overview
Features
Sequential recording
Combining two DSR-70/70P units allows you to
perform sequential recording from one unit to another.
Using two cassettes repeatedly, the last six hours of
recording is always available (using 184 minute tapes).
When you renew the cassette about every 3 hours,
endless recording is possible.
Compatible with wide screen aspect ratio
(16:9)
The unit can record and play back aspect ratio
information. When video accompanied by wide-screen
aspect ratio information is recorded or played back, the
unit’s LCD monitor automatically switches to 16:9
mode. The video signal output from the unit also
contains the aspect ratio information.
AC and DC power
This unit is equipped with V-shoe attachment, on
which BP-L60/L60A/L90/L90A or BP-90/90A battery
or an AC adaptor can be mounted. The unit can
operate for about 120 minutes (with no optional boards
installed) with BP-L90 battery mounted. For AC
operation, you can connect an AC-550/550CE or AC-
DN2/DN2A adaptor.
Combination of two units
Using the optional BKNW-225 Docking Kit to
combine two DSR-70/70P units gives you a portable
editor.
Compact and lightweight
Even though it is equipped with an LCD monitor and a
speaker, the unit weighs only 5.8 kg (12 lb 12 oz). Its
compact design makes it easy to carry anywhere.
Options
Optional boards
The optional boards available are as follows.
You can use any and only one of the following boards
at the same time.
• DSBK-140 i.LINK/DV Input/Output Board
This board enables cut editing between two DSR-70/
70P units. This board also allows you to connect the
unit to other equipment provided with a Sony DV
connector to carry out editing or dubbing of digital
video and audio signals.
• DSBK-150 SDTI (QSDI) Input/Output Board
The unit fitted with this board can be connected to
the ES-7 EditStation to carry out digital nonlinear
editing. You can also connect the unit to the DSR-85/
85P/80/80P/60/60P Digital Videocassete Recorder or
Player and carry out digital editing or dubbing
operation.
• DSBK-160 SDI Input/Output Board
Using this board, you can connect the unit to the
DNW-A25/A25P Betacam SX Digital Videocassette
Recorder and carry out cut editing.
• DSBK-170 Analog Component Input/Output
Board
This board allows you to connect the unit to Betacam
SP VCRs and carry out editing and dubbing
operations.
The following board may be used in combination with
any one of the above four boards.
• DSBK-180/180P Dual Video Input Board
This board allows two video cameras to be connected
to the unit so that you may carry out video recording
switching between the signals from the two cameras.
BKNW-225 Docking Kit
Use to combine two DSR-70/70P units.