Filter
Top Products
Chapter 2 Power Preparations and Connections
Chapter 2 Power Preparations and Connections 31
To remove the battery pack
With the lever pushed in, slide the BP-L60(A)/L90(A) out.
Using the BP-90(A) Battery Pack
Different battery adaptors are used when mounting the BP-90(A) on the
top panel of this unit and when connecting it the DC IN connector.
This unit can be operated for about 70 minutes at normal temperature on a
fully charged BP-90(A) Battery Pack. (When no optional board is
installed.)
To charge the battery pack
Before use, be sure to charge the battery pack with the BC-210/210CE/
410/410CE Battery Charger. It takes about 2 hours to charge the BP-
90(A).
For more information about how to charge the battery pack, refer to the manual
for the BC-210/210CE/410/410CE.
To attach to the top panel of this unit
Use the DC-L90 Battery Adaptor.
1 Mount the BP-90(A) in the DC-L90.
Lever
BP-L60(A)/L90(A)
1 Lift the lever up.
5 Close the side cover and
pull the lever down.
3 Insert the BP-90(A).
4 Push the plug in.
2 Open the side cover.
(Continued)