Filter
Top Products
22
Location and Function of Parts
a MENU button
Press this button to display the menu on the monitor screen
and the time counter display. Press it again to exit the menu
display.
On how to use the menu, see Chapter 6 “Menu Setting”
b RESET button
Press this button to:
• reset menu settings,
• reset the time data shown in the time counter display to
zero
• send a negative response to the prompts issued by the
unit, or
• delete clips.
c SET button
Press this button to:
• save new settings, such as selected menu items and time
code settings, to memory.
• send a positive response to the prompts issued by the
unit, or
• create a clip list.
d Cursor/clip operations buttons
Press these buttons to select a menu item, to change
timecode initial values and user bits data, and to set clip in
and out points, and to set cue points.
K (IN): Moves to the left or sets an in point.
J (CUE): Moves up or sets a cue point.
k (OUT): Moves right or sets an out point.
j: Moves down.
For details on modifying the time code value, see “To set
the initial time code value and user bit data” on page 30.
7 Search control section
a SEARCH button
Press this button, turning it on, to use the search dial for
search playback in jog or shuttle mode.
See the description of the search dial 4 for more
information about the jog and shuttle modes.
b VAR (variable) button
Press this button, turning it on, to use the search dial for
search playback in variable mode.
See the description of the search dial 4 for more
information about the variable mode.
c JOG and SHUTTLE indicators
One of the indicators lights to show the current or most
recent search playback mode.
JOG indicator: Jog mode
SHUTTLE indicator: Shuttle or variable mode.
d Search dial
Rotate to perform search playback in jog shuttle, or
variable mode.
The G indicator lights when you rotate to the right to
indicate forward direction playback. The g indicator lights
when you rotate to the left to indicate reverse direction
playback. The s indicator lights when playback is
stopped. The s lights when unit is powered on.
Each press of the search dial toggles between shuttle and
jog mode, or between variable mode and jog mode.
JOG SHUTTLE
SEARCH VAR
1 SEARCH button
2 VAR button
3 JOG and SHUTTLE
indicators
4 Search dial
Search
playback mode
Operation/function
Shuttle Press the SEARCH button or the search
dial to select shuttle mode (the SHUTTLE
indicator lights). Playback is carried out
at a speed determined by the rotation
angle of the search dial.
The maximum shuttle playback speed
can be changed with the MAX SRCH
SPEED menu item (see page 65).
Jog Press the SEARCH button or the search
dial to select jog mode (the JOG indicator
lights). Playback is carried out at a speed
determined by the rotation speed of the
search dial. The playback sped range is
±1 times normal speed. The search dial
does not click in this mode.
Variable Press the VAR button, lighting it (the
SHUTTLE indicator also lights). You can
control fine-grained (in 61 steps)
playback over the range (2 times normal
speed. The search dial clicks in the
positions for still playback, ±1 times
normal speed, and ±2 times normal
speed.