Filter
Top Products
23
Location and Function of Parts
Rear Panel
a REF. (reference) VIDEO IN connectors (BNC
type)
Input a reference video signal. The two connectors are
loop-through connectors. You can connect the reference
video signal input to the left connector to other equipment
via the right connector (marked ). When no connection
is made to the right connector, the left connector is
terminated with an impedance of 75 Ω automatically.
b POWER (main power) switch
Switch to the ? side to turn the power on. Switch to the a
side to turn the power off. Normally you should leave this
switch in the on position and power the unit on and off with
the power switch on the front panel.
Note
When you power the unit off with the switch on the front
panel, data is saved before the power is cut off. If you need
to turn the main power off, always power the unit off with
the switch on the front panel before setting this switch to
off.
c - AC IN connector
Use the supplied power cord to connect this to an AC
outlet.
d CONTROL connector (mini-jack)
Connect the supplied RM-LG2 Remote Control Unit.
e REMOTE IN (R)/OUT (P) connectors (D-sub 9-
pin)
You can connect remote control units to these connectors
using an optional 9-pin remote cable. You can also use this
connectors to make cascade connections between several
DSR-DR1000/DR1000P units.
Use the IN(R) connector to connect an editor. When
connecting remote control devices, connect the device that
controls recording operations to the IN(R) connector and
the device that controls playback operations to the OUT(P)
connector.
Before doing this, you need to set the REMOTE I/F menu
item (see page 72) to select how the connectors are used.
3 -AC IN connector
6 400 (i.LINK) connector
1 Analog video/audio signal
input section
(see page 24)
2 Analog video/audio signal
output section
(see page 25)
3 Digital signal input/output
section (see page 26)
5 REMOTE IN (R)/OUT (P) connectors
4 Time code input/output section (see page 26)
1 REF. VIDEO IN connectors
2 POWER switch
4 CONTROL connecter
7 Network connecter