Filter
Top Products
59
Checking Communications Status
3
Press the SET button to save the selected data. Press
the RESET button to delete it. Press the MENU button
to return to the menu without saving or deleting any
data.
When the SET is pressed
The clip data is saved under a new number. The
message “Saved clip as clip number XXXX” appears.
Address book data is added to the address book.
When the new data has been saved, the NEW
CONTENTS indicator on the front panel of the unit
goes off.
Notes
• Data with NG status or an unknown data type cannot
be saved.
• Clip data cannot be saved during recording.
• Address book data cannot be saved in the address
book when it contains more than 50 host
destinations.
When the RESET button is pressed
A confirmation message appears on the monitor
screen and in the time counter display. Press the SET
button if you actually want to delete the data. Press the
RESET button if you want to cancel the deletion. The
NEW CONTENTS indicator on the front panel of the
unit goes off when data is deleted.
When the MENU button is pressed
You return to the receive data screen. No data is saved
or deleted.
Checking
Communications Status
In the Network menu, you can check the status of transfer
jobs (executing or standby) and check whether the result of
a data transfer was OK or not. As required, you can then
abort the transfer or withdraw a connection request.
Use the following procedure to display the status list.
1
Select the STATUS item on the Network menu and
press the k (OUT) button.
The status list screen appears.
The following are displayed to indicate the status.
EXEC: Executing
WAIT: On standby
OK: OK
NG: Error
2
Select a data item for which you want to view detailed
information and press the k (OUT) button.
The STATUS INFO screen appears (the following
example shows status information for clip data).
NEW CONTENTS INFO
< 01: AAAAAAAA >
IP : 192.168.000.001
DATE : 2002 07 31
TIME : 17:39
TYPE : CLIP
DUR : 0:01:00:15
STATUS : OK
DATA SAVE : SET KEY
DELETE : RESET KEY
TO MENU : MENU KEY
Source host IP address
Date received
Time received
Data type
Total duration of received data
OK/NG status
Not shown when STATUS is
NG or TYPE is UNKNOWN
a) CLIP: Clip
ADRS BOOK: Address book
UNKNOWN: Type unknown
b) When data type is address book or unknown, –:
–:–:-- is
shown.
Status
NETWORK MENU
SEND
RECEIVE
ADDRESS BOOK
NEW CONTENTS LIST
STATUS
Time counter display
Monitor screen
NETWORK MENU
STATUS
S CLP XXXXXXXXXXX EXEC
S ADR XXXXXXXXXXX WAIT
R CLP XXXXXXXXXXX WAIT
S LST XXXXXXXXXXX WAIT
S ADR XXXXXXXXXXX OK
S CLP XXXXXXXXXXX NG
Status
Clip name
Clip type
a)
Sending (S) or Receiving (R)
a) CLP: Clip
LST: Cliplist
ADR: Address data