Filter
Top Products
17
Location and Function of Parts
Chapter 1 Overview
a REC (record) indicator
Lights during recording.
b REC (record) button
When you press this button while holding down the PLAY
button, it lights and recording begins.
Note
When the control mode selector is set to REMOTE (the
REMOTE indicator is lit), no recording/playcack control
buttons other than the STOP button will work. This can be
changed with the LOCAL ENABLE menu item (see page
62).
c PREV (previous) button
When pressed once, moves to the start point of the clip
containing the current position. When pressed a second
time, moves to the start point of the previous clip.
Pressing the PREV button with the PLAY button held
down allows you to view fast reverse playback. However,
to do this, you need to set the F. FWD/REW menu item
under the AUTO EE SELECT menu item (see page 61) to
PB.
If cue points are set (see page 33), the PREV button is used
to cue up a cue point (see page 41).
d PLAY button
When you press this button, it lights and playback begins.
If you press this button during recording, the recording
operation is stopped and this unit enters playback mode.
e NEXT button
When pressed once, moves to the start point of the next
clip. However, when this button is pressed while in the last
clip, it moves to the end point of that clip.
Pressing the NEXT button with the PLAY button held
down allows you to view fast forward playback. However,
to do this, you need to set the F. FWD/REW menu item
under the AUTO EE SELECT menu item (see page 61) to
PB.
If cue points are set (see page 33), the NEXT button is used
to cue up a cue point (see page 41).
f STOP button
Press this button to stop the recording or playback
operation.
5 PANEL SELECT section
Note
The buttons of the PANEL SELECT section cannot be
turned on or off during simultaneous recording and
playback.
a R (recorder) button
Press this button, turning it on, to put the control panel of
the unit into a state in which the only operations possible
are recording operations. The buttons which function in
this state are the REC button, PLAY button (only when
pressed at the same time as the REC button), and the STOP
button.
b P (player) button
Press this button, turning it on, to put the control panel of
the unit into a state in which the only operations possible
are playback operations. The REC button and PLAY
button do not function, even if pressed at the same time.
c EXT (external) button
When you have connected multiple DSR-DR1000A/
DR1000AP units in a cascade sequence and want to
control the other units from a one unit, press the EXT
button of the controlling unit, turning it on.
You can connect multiple DSR-DR1000A/DR1000AP units
for multi-simultaneous playback. For details, see
“Connecting Multiple Units for Simultaneous Playback
(Multi-Simultaneous Playback)” on page 39.
6 Menu/clip control section
a MENU button
Press this button to display the menu on the monitor screen
and the time counter display. Press it again to exit the menu
display.
PANEL SELECT
RP
EXT
1 R button
2 P button
3 EXT button
MENU RESET SET
CUE
IN OUT
1 MENU button
2 RESET button
3 SET button
4 Cursor/clip operation
buttons