Sony DSR-DR1000AP DVD Recorder User Manual


 
40
Playback
Chapter 3 Recording and Playback
High-Speed and Low-Speed Search
—Quickly and Accurately
Determining Editing Points
Use the search function to easily locate the desired scene
and to quickly and accurately determine edit points.
Searching with the NEXT and PREV
buttons
The PREV and NEXT buttons can be used alone to jump
to the start and end points of clips (see page 43).
To cue up a cue point
Press the PREV/NEXT button with the J (CUE) button
held down.
For more information on this operation, see “Cueing Up a
Desired Cue Point” on page 41.
To search while viewing the video at fast speed
(PLAY + PREV/NEXT)
To search in the reverse direction, press the PREV button
with the PLAY button held down. (The both buttons light.)
To search in the forward direction, press the NEXT button
with the PLAY button held down. (The both buttons light.)
Searching with the search dial
You can use the search dial of this unit to perform the
following kinds of search playback.
Shuttle: Press the SEARCH button or search dial to select
shuttle mode (the SHUTTLE indicator lights).
Playback is carried out at a speed determined by the
rotation angle of the search dial.
The maximum shuttle playback speed can be changed with
the MAX SRCH SPEED menu item (see page 62).
Jog: Press the SEARCH button or search dial to select jog
mode (the JOG indicator lights). Playback is carried
out at a speed determined by the rotation speed of the
search dial. The playback speed range is (1 times
normal speed.
Variable: Press the VAR button, lighting it (the
SHUTTLE indicator also lights). You can control fine-
grained (in 61 steps) playback over the range (2 times
normal speed).
Playback using the tape speed override
(TSO) function
You can use the tape speed override function to adjust the
playback speed temporarily. This function is convenient
for playback phase synchronization with another VCR
playing back the same program.
1
(A)Hold down the PLAY button, and turn the search
dial in the desired direction to adjust the playback
speed.
The range of speed adjustment is ±15% in steps of
1%.
(B)Hold down the PLAY button, and press the J
(CUE) or j buttons to adjust the playback speed.
The playback speed can be adjusted to ±8% only.
2
When the adjustment is completed, release the PLAY
button.
The playback speed returns to normal speed.
Search operations via external equipment
You can control the unit in the following operation modes
from an editing control unit connected to the REMOTE IN
(R) connector on the rear panel, the supplied remote
control unit connected to the CONTROL connector, or
control equipment connected to the S400(i.LINK)
connector.
To search while playing at fast speeds
Shuttle: Use this mode to view color video playback at
speeds ranging from 0 to 60 times normal speed in
both directions.
Jog: Use this mode for low-speed search and frame-by-
frame search. You can specify how speed changes in
response to rotations of the search dial by using the
JOG RESPONSE menu item (see page 62).
Variable: Use this mode to monitor noise-free video and
audio signals at speeds ranging from 0 to 2 times
normal speed in both directions.
Still: Use this mode to view a still picture of any field.
Jog audio: Use this mode to monitor the audio at speeds
ranging from 0 to 1 times normal speed in both
directions.
1
(A)
,1
(B)
,2 1
(B)
1
(A)
Display section