Filter
Top Products
22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z Hint
To realize better surround sound effects, make sure
that your listening position is in between your
speakers.
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack.
B
B-1
B-2
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital cord
(not supplied)
Stereo audio cord
(not supplied)
to audio input
to coaxial or optical
digital input
to LINE OUT AUDIO L/R
1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
l: Signal flow
Optical digital cord
(not supplied)
Remove plug cap
before connecting.
or