Sony DVP-LS755P DVD Recorder User Manual


 
19
Hookups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected Connection Your setup (example)
TV
Surround effects:
– TVS DYNAMIC (page 46)
– TVS WIDE (page 46)
(page 20)
Stereo amplifier (receiver)
and two speakers
Surround effects:
– TVS STANDARD (page 46)
or
MD deck/DAT deck
Surround effects:
– TVS STANDARD (page 46)
(page 21)
AV amplifier (receiver) having a Dolby
*
Surround (Pro Logic) decoder and 3 to 6
speakers
Surround effects:
– Dolby Surround (Pro Logic) (page 75)
(page 22)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
Surround effects:
– Dolby Digital (5.1 ch) (page 75)
– DTS (page 75)
– MPEG (5.1ch) (page 75)
(page 23)
A D
A
B
C
D
D
,continued