Filter
Top Products
21
Hookups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
*1 Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
*2 “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Components to be connected Connection Your setup (example)
TV
• Surround effects:
– TVS DYNAMIC (page 48)
– TVS WIDE (page 48)
(page 22)
Stereo amplifier (receiver)
and two speakers
• Surround effects:
– TVS STANDARD (page 48)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 48)
(page 23)
AV amplifier (receiver) having a Dolby
*
1
Surround (Pro Logic) decoder
and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 81)
(page 24)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS*
2
, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 81)
– DTS (page 81)
– MPEG (5.1ch) (page 81)
(page 25)
A D
A
B
C
D
D
,continued