Filter
Top Products
35
Hookups
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 23 to
29 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 74 for using the Setup Display.
Audio connection (pages 22 to 29)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 80).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 80).
• Set “DIGITAL OUT” to “ON” (page 80).
• Set “DISTANCE” and “LEVEL” according
to the connected speakers (page 83).
z Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 80).
• For connections
Set “48 kHz/96 kHz PCM” to “96 kHZ/24 bit”
only if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 81).
B
E
A
B-1
C-1
D-3
E
B-2 C-2 D-2
D-1
B-1 C-1 D-1
B-2 C-2 D-2
D-3
E