Filter
Top Products
54
Settings and Adjustments
Code number
91(default), 88,
89
84, 85, 86
92, 93
81, 82, 83
99
87
97, 98
94, 95, 96
90*
Controlling an AV receiver (amplifier)
with the remote
1 Slide the TV/DVD•RECEIVER switch to
DVD•RECEIVER.
2 Hold down 1/u (POWER), and enter your AV
receiver’s manufacturer’s code (see the table
below) using the number buttons. Then release
1/u (POWER).
Code numbers of controllable receivers
(amplifiers)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
receiver (amplifer).
You can also change the sound volume of the AV receiver
(amplifier) using VOL.
Note
Depending on the AV receiver (amplifier), you may not be able to
control your AV receiver (amplifier).
VOL
Controlling the TV or the AV Receiver (Amplifier) with the Supplied Remote
1
4
7
2
5
8
0
3
6
9
Manufacturer
Sony
Denon
Kenwood
Onkyo
Pioneer
Sunsui
Technics
Yamaha
–
* By setting the code number 90, you can adjust
the volume of the TV even if the TV/
DVD•RECEIVER switch is on the
DVD•RECEIVER side, if you do not control an
AV receiver (amplifier) with the remote.
When you set the TV/DVD•RECEIVER switch to TV, you
can control your TV using the keys below.
By pressing
1/u (POWER)
TV/VIDEO
VOL
TV CH
Number buttons
and ENTER
Note
Depending on the TV, you may not be able to control your TV or
to use some of the buttons above.
You can
Turn the TV on or off
Select the input source for the TV
Adjust the volume of the TV
Change the channel of the TV
Select the channel of the TV
TV/VIDEO
ENTER
1/u (POWER)
Number buttons/
ENTER
TV/
DVD•RECEIVER
switch
VOL
TV CH
1
4
7
2
5
8
0
3
6
9