Filter
Top Products
37
Editing
Dubbing only desired scenes
– Digital program editing
Unwanted scene Unwanted scene
Switch the order
You can duplicate selected scenes (programs) for editing onto a tape without operating
the other (recording) VCR.
Scenes can be selected by frame.
Before operating the Digital program editing
Step 1 Connecting the other (recording) VCR (p. 37).
Step 2 Setting the other (recording) VCR for operation (p. 38).
Step 3 Adjusting the synchronicity of the other (recording) VCR (p. 43).
When you dub using the same (recording) VCR again, you can skip steps 2 and 3.
Using the Digital program editing function
Operation 1 Making the program (p. 45).
Operation 2 Performing a Digital program editing (dubbing a tape) (p. 46).
Notes
•The Digital program editing works only for tapes recorded in the Digital8 system.
•You cannot dub the display indicators.
•When you edit a digital video, the operation signals cannot be sent with LANC.
•When you confirm the set-up video screen, connect your (playing) VCR to a TV, or a
monitor using the super laser link function.
Step 1: Connecting the other (recording) VCR
You can connect either the A/V connecting cable or the i.LINK cable (DV connecting
cable).
When you use the A/V connecting cable, connect the devices as illustrated on page 35.
When you use the i.LINK cable (DV connecting cable), connect the devices as
illustrated on page 36.
Unwanted scene Unwanted scene
Switch the order