Filter
Top Products
HMZ-T3W 4-471-975-11(1)
Continued in 2 Adjust and Wear
1 Connect
Prepare the following items included in the box.
Head mounted unit
and battery unit (1)
Processor unit (1) Headphones (1) HDMI cable (1) Micro USB cable (1)
AC adaptor (small)
(AC-UD10) (1)
AC adaptor (large)
(AC-L200D) (1)
AC power cord
(mains lead) (2)
Printed using VOC (Volatile Organic Compound)-free
vegetable based ink.
© 2013 Sony Corporation Printed in Japan
4-471-975-
11
(1)
Before use, charge the battery.
Charging starts when the small AC adaptor and the AC power cord are
connected to the battery unit.
The (power) indicator is lit in orange during charging, and it goes dark
when charging is complete.
Head mounted unit
Battery unit
Tips
You can use the system while
charging, with the AC power cord
connected to the power source.
It will take about 5 hours to fully
charge the battery, when the
system is turned off.
Micro USB cable
(supplied)
AC adaptor (small)
(supplied)
To wall outlet
AC power cord (mains
lead) (supplied)
1
Connect playback equipment and a TV to the
processor unit.
You can watch video from playback equipment on the
TV by connecting the TV to the processor unit with a
High-Speed HDMI cable.
In such a case, set “HDMI pass-through” in “General
Setup” to “On.”
HDMI cable (supplied)
TV
Game console
Blu-ray Disc™ player
Note
HDMI pass-through does
not enable simultaneous
video playback on the head
mounted unit and TV.
Processor unit (Rear)
HDMI IN
HDMI OUT
(TV)
HDMI cable
(sold separately)
2
Connect headphones.
Connect the miniplug of the
headphones to the headphone
jack.
3
Connect the large AC adaptor and the AC power
cord to the processor unit.
Processor unit
(Rear)
AC adaptor
(large) (supplied)
AC power cord
(mains lead)
(supplied)
To wall outlet
4
Turn the system on.
1. Turn the processor unit on.
2. Turn the head mounted
unit on.
5
Turn the playback equipment on.
7
Adjust the orientation of the battery unit and
confirm that the WIRELESS indicator lights in
blue.
Notes
The radio waves may not be
received properly, depending
on the orientation of the battery
unit. Use the battery unit with the
SONY logo side up.
Use where there are no
obstructions between the
processor unit and the battery
unit.
Communication distance:
Approx. 5 m
6
Select the input.
Press the INPUT button on the
processor unit to select the input
for the source equipment. The HDMI
INPUT indicator of the selected input
will light in orange.
Head Mounted Display
Startup Guide
Before use, also refer to “Health Precautions” and “Precautions”
in the “Reference Guide.”
HMZ-T3W