Sony KV-VF21M70 TV VCR Combo User Manual


 
51
Additional Information
Troubleshooting
If you have any problems while viewing your video TV, please
check the following troubleshooting guide. If the problem persists,
contact your Sony dealer.
Symptom
Possible cause
Solutions
TV section
No picture/No sound
The power cord or antenna
is not connected.
The video TV is not turned
on.
Check the AC power cord and the
antenna connections.
Press ?/1 on the video TV. If the
standby indicator (1) is lit in red,
press ?/1 or a program number
button on the remote control.
Good picture/No sound
The volume level is too
low.
The sound is muted.
Headphones are connected
to i (headphones) jack.
Press 2 + to increase the volume
level.
Press % to cancel the muting.
Disconnect the headphones.
No color or poor color
The color level setting is
too low.
The picture setting is
inappropriate.
The color system setting is
inappropriate.
The antenna direction,
position and angle need
adjustment.
Adjust PICTURE, COLOR and
BRIGHT in the PERSONAL
ADJUST menu. (page 35)
Press PIC MODE to switch the
picture setting. (page 15)
Display the TV SET UP menu and
check the color system (COL SYS)
setting. (page 34)
Adjust the antenna direction,
position and angle. Contact a Sony
dealer for advice.
Double images or “ghosts” Broadcast signals are
reflected by nearby
mountains or buildings.
The antenna direction,
position and angle need
adjustment.
Use a highly directional antenna.
Adjust the antenna direction,
position and angle. Contact a Sony
dealer for advice.
No picture/No sound from
video input sources
The connecting cord
between the video TV and
the input sources is
disconnected.
Input is not selected
correctly.
Check the connection between the
video TV and the input sources.
Press t so that “t1” or “t2”
appears. (page 48)
Additional Information
continued