Sony MZ-G750DPC DVD Recorder User Manual


 
29
3 Play the sound source.
To stop recording, press x.
The recorder remains the previous setting of the recording mode
when you record the next time.
Notes
You cannot change the recording mode while recording.
It is recommended that you use the supplied AC power adaptor for long
recordings.
If you try to play an MD recorded in LP2 or LP4 on MD players or recorders
that do not support these modes, playback will not start and LP: will appear
on the display.
Sound recorded through digital (optical) input can be monitored in stereo
through headphones/earphones, etc.
When you record in LP4 mode, momentary noise may be produced on very
rare occasions with certain sound sources. This is because of the special
digital audio compression technology that enables a recording time 4 times
longer than normal. If noise is produced, it is recommended that you record
in normal stereo or LP2 mode to obtain better sound quality.
To start/stop recording in sync with the
source player (Synchro-recording)
You can easily make digital recordings of a digital source on an MD.
Before synchro-recording, make connections to the digital source
with a digital cable, and insert a recordable MD.
1 Press ENTER, while the recorder is stopped.
CD players,
etc.
<MENU,
REC
ENTER
continued