Filter
Top Products
89
Additional Information
, While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select “2:STEREO,”
“2:1/L,” or “2:2/R.”
, The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format, in this case set
“AUDIO(HDMI)” in “AUDIO SETUP” to
“PCM” (page 84).
No sound is output from the HDMI OUT
jack
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
, The HDMI OUT jack does not output Super
Audio CD sound.
Sound distortion occurs.
, Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 82).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“AUDIO DRC” in “AUDIO SETUP” to
“TV MODE” (page 82).
, Set “AUDIO ATT” in “AUDIO SETUP” to
“OFF” (page 82).
The surround effect is difficult to hear
when you are playing a Dolby Digital, or
DTS sound track.
, Check the speaker connections and setting
(page 28, 30, 83).
, The 5.1 channel sound is not recorded on
the disc being played.
The sound comes from the center speaker
only.
, Depending on the disc, the sound may come
from the center speaker only.
, Set the surround mode setting to “OFF”
(page 54).
Operation
The remote does not function.
, The batteries in the remote are weak.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
The disc does not play.
, The disc is turned over.
Insert the disc with the playback side facing
down.
, The disc is skewed.
, The player cannot play certain discs
(page 9).
, The region code on the DVD does not match
the player.
, Moisture has condensed inside the player
(page 5)
.
, The player cannot play a recorded disc that
is not correctly finalized
(page 9)
.
The MP3 audio track cannot be played
(page 63).
, The DATA CD is not recorded in an MP3
format that conforms to ISO 9660 Level 1/
Level 2 or Joliet.
, The MP3 audio track does not have the
extension “.MP3.”
, The data is not formatted in MP3 even
though it has the extension “.MP3.”
, The data is not MPEG1 Audio Layer 3 data.
, The player cannot play audio tracks in
MP3PRO format.
, “MODE (MP3, JPEG)” is set to “IMAGE
(JPEG)” (page 67).
The JPEG image file cannot be played
(page 63).
, The DATA CD is not recorded in a JPEG
format that conforms to ISO 9660 Level 1/
Level 2, or Joliet.
, The file has an extension other than
“.JPEG” or “.JPG.”
, The image is larger than 3072 (width)
×
2048 (height) in normal mode, or more than
3,300,000 pixels in progressive JPEG.
(Some progressive JPEG files cannot be
displayed even if the file size is within this
specified capacity.)
, The image does not fit the screen (the image
is reduced).
, “MODE (MP3, JPEG)” is set to “AUDIO
(MP3)” (page 67).
The MP3 audio tracks and JPEG image
files start playing simultaneously.
, “MODE (MP3, JPEG)” is set to “AUTO.”
(page 67).
,continued