Filter
Top Products
Playing CDs in Various Modes
Playing Discs in Various Modes
31
GB
Manufacturer
Sony (default)
Grundig
Hitachi
Loewe
Nokia
Panasonic
Philips
Saba
Samsung
Sanyo
Sharp
Telefunken
Thomson
Toshiba
Code
number
01
11
24
45
15,16,69
17,49
06,07,08
12,13
22,23
25
29
36
43
38
Controlling the TV or the AV
Receiver (Amplifier) with the
Supplied Remote Z
If you adjust the remote signal, you can control your
TVs with the supplied remote. Default setting is to
control Sony TVs with the g mark.
When you connect the player to an AV receiver, you
can also adjust the volume of the receiver with the
supplied remote .
Controlling TVs with the remote
1 Slide TV/DVD switch to TV.
2 Hold down 1/u, and enter your TV’s
manufacturer’s code in the table below using the
number buttons. Then release 1/u.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote commander,
the code number automatically resets to 01 (Sony). Reset the
appropriate code number.
(Continued)
123
456
789
0
Number
buttons
TV/DVD
switch
1/u