Sony DVP-S7700 DVD Player User Manual


 
Locating a Scene or Track You Want
Locating a Scene or Track You Want
Locating a Scene or Track You Want
Settings and Adjustments
39
GB
Settings and Adjustments
Settings for Sound (INITIAL
SETUP 2)
Select “
2
” after pressing SET UP.
“INITIAL SETUP 2” allows you to set the sound
according to the playback conditions.
Default settings are underlined.
pTRACK SELECTION
Gives the sound track which contains the highest number of
the channels priority when you play a DVD on which
multiple audio formats are recorded. If multiple audio
channels are recorded in DTS, MPEG AUDIO or Dolby Digital
(AC-3) format, the highest-numbered channel audio recorded
in PCM, DTS, MPEG AUDIO or Dolby Digital (AC-3) format
is played.
OFF: No priority given.
AUTO: Priority given.
Notes
When you set this item to “AUTO”, the language may
change depending on the “AUDIO” settings in
“LANGUAGE SETUP.” The “TRACK SELECTION” setting
has higher priority than that of “AUDIO” settings in
“LANGUAGE SETUP” (page 37).
If you set “DTS” in “INITIAL SETUP 3” to “OFF”, the DTS
sound track is not played even if you set this item to
“AUTO” and the highest-numbered channel audio is
recorded in DTS format.
If PCM, DTS, MPEG AUDIO and Dolby Digital (AC-3)
sound tracks have the same number of the highest
channels, the player selects PCM, DTS, Dolby Digital
(AC-3), and MPEG AUDIO sound tracks, in this order.
Depending on the DVD, the audio with priority may be
predetermined. In this case, you cannot give priority to the
DTS, MPEG AUDIO or Dolby Digital (AC-3) format by
selecting “AUTO.”
pSURROUND
Switches the mixing down methods when you play a DVD on
which the sound in Dolby Digital (AC-3) format is recorded.
ON: when the player is connected to an audio component
that conforms to Dolby surround, Dolby Pro Logic
surround, etc.
OFF : when the player is connected to a normal audio
component.
pAUDIO DRC (Dynamic Range Control)
Makes the sound clear with the volume turned down at night,
etc. when you play a DVD. This affects the output from the
LINE OUT (AUDIO) and EURO AV (1, 2) connectors when
you play the Dolby Digital (AC-3) sound tracks.
OFF: Normally select this position.
ON: makes the sound clear even if you turned the volume
down.
Note
When you play DVDs without the AUDIO DRC function,
there may be no effect on the sound.
pAUDIO ATT (attenuation)
Selects the setting of the output from the LINE OUT (AUDIO)
and EURO AV (1, 2) connectors according to audio equipment
to be connected.
OFF: turns off the audio attenuation.
ON: reduces the audio output level so that no sound
distortion occurs.
Note
The setting does not affect the output from the DIGITAL OUT
connectors.
pAUDIO FILTER
Selects the type of digital filter to reduce the noise higher
frequency than 22.05kHz (fs 44.1kHz), 24kHz (fs 48kHz) or
48kHz (fs 96kHz).
SHARP: makes the sound clear and provides smooth sound
reproduction. Normally set this position.
SLOW: makes the sound warm and deep.
Note
Depending on the disc, there may be no effect on the sound.
INITIAL SETUP 2
SURROUND: ON
AUDIO DRC: OFF
QUIT
ENTER SETUP
OFFAUDIO ATT:
AUDIO FILTER:
TRACK SELECTION:
SHARP
OFF
1 2
3