Filter
Top Products
Additional Information
Additional Information
43
GB
Additional Information
Troubleshooting
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
The power is not turned on.
/If the indicator above the
1/u button is not lit,
check that the AC power cord is connected
securely.
There is no picture.
/Check that the player is connected securely.
/The video connecting cord is damaged. Replace
it with a new one.
/Make sure you connect the player to the video
input connector on the TV. (page 6)
/Make sure you turn on the TV.
/Make sure you select the video input on the TV
so that you can view the pictures from the
player.
/In the setup display, set “EURO AV OUT” and
“COMPONENT OUT” in ”INITIAL SETUP 3”
to the appropriate item conforms to your
system. (page 40)
/“OFF” in “COMPONENT OUT” under
“CUSTOM SETUP” is selected, when you have
connected the player to a monitor or projector
via only the COMPONENT VIDEO OUT
connectors. To view the picture, connect the
monitor via EURO AV, VIDEO OUT or S
VIDEO OUT.
There is no sound.
/Check that the player is connected securely.
/The audio connecting cord is damaged. Replace
it with a new one.
/Make sure you connect the player to the audio
input connectors on the amplifier. (page 6)
/Make sure you turn on the TV and the
amplifier.
/Make sure you select the appropriate position
on the amplifier so that you can listen to the
sound from the player.
/The player is in pause mode or in Slow-motion
Play mode. Press · to return to normal play
mode.
/Fast forward (1
) or 2)) or fast reverse (10
or 20) is performed. Press · to return to
normal play mode.
/If you set all items of “DIGITAL OUT“ in
“INITIAL SETUP 3” to “OFF” in the setup
display, no sounds come out from the DIGITAL
OUT OPTICAL and COAXIAL connectors.
(page 40)
/You cannot hear the DTS sounds unless you
connect the player to an audio component with
a built-in DTS decoder. (page 33)
The remote does not function.
/Remove any obstacles between the remote and
the player.
/Use the remote near the player.
/Point the remote at the remote sensor g on the
player.
/Replace all the batteries in the remote with new
ones if they are weak.
The picture noise appears.
/Clean the disc.
/If video from your DVD player has to go
through your VCR to get to your TV, the copy-
protection applied to some DVD programs
could affect picture quality. If you still
experience problems after checking your
connections, please try connecting your DVD
player directly to your TV's S-input, if your TV
is equipped with these input.
/The picture noise appears when the player is
connected to the TV via the video deck.
Do not connect the player to the video deck.
Connect the player directly to the TV. (page 7)
The picture is black and white.
/In the setup display, set “EURO AV OUT” in
”INITIAL SETUP 3”
to the appropriate item
conforms to your TV. (page 40)
/Depending on the TV, the picture on the screen
becomes black and white when you play a disc
recorded in NTSC color system.
The sound noise is heard.
/Clean the disc.
/When you play DTS sound tracks on a CD, a
loud noise will come out from LINE OUT
(AUDIO) connectors.
The sound distortion occurs.
/In the setup display, set “AUDIO ATT” in
”INITIAL SETUP 2” to “ON.”
The disc does not play.
/There is no disc inside (“INSERT DISC” appears
on the TV screen).
Insert a disc.
/Insert the disc with the playback side facing
down on the disc tray correctly.
/Place the disc on the disc tray correctly.
/Clean the disc.
/The player cannot play CD-ROMs, etc. (page 5)
Insert a DVD, a VIDEO CD, or CD.
/Check the region code of the DVD. (page 4)
/Moisture has condensed inside the player.
Remove the disc and leave the player turned on
for about half an hour. (page 42)