Filter
Top Products
Getting Started
6
GB
Unpacking
Check that you have the following items:
• Audio connecting cord (1)
• Video connecting cord (1)
• S video cord (1)
• Remote commander (remote) RMT-D107P
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor g on the player.
z You can control TVs and AV receivers (amplifiers)
using the supplied remote
See page 31.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVD
player to a TV. You cannot connect this player to a TV
without an EURO AV (SCART) connector or a video
input connector. Be sure to turn off the power of
each component before making the connections.
pTo connect to a TV and a VCR
pTo connect to a TV and to listen to the sound through
speakers connected to a receiver (amplifier) (2ch – L,R)
CD/DVD player
To …EURO
AV1 (RGB)-TV
To an AC
outlet
TV
: Signal flow
CD/DVD player
To
AUDIO
OUT
To an AC
outlet
TV
To audio
input
: Signal flow
Receiver (Amplifier)
Getting Started
To : EURO
AV2
To EURO AV
(SCART) OUT
VCR
To
…EURO AV1
(RGB)-TV
YC
B
/B–YC
R
/R–Y
COMPONENT VIDEO OUT
1
R–AUDIO 2–L
LINE OUT
VIDEO 2
R–AUDIO 1–L VIDEO 1
S VIDEO OUT
DOLBY DIGITAL (AC-3)
PCM/MPEG/DTS
DIGITAL OUT
OPTICAL COAXIAL
YCB/B–YCR/R–Y
COMPONENT VIDEO OUT
1
R–AUDIO 2–L
LINE OUT
VIDEO 2
R–AUDIO 1–L VIDEO 1
S VIDEO OUT
DOLBY DIGITAL (AC-3)
PCM/MPEG/DTS
DIGITAL OUT
OPTICAL COAXIAL
To EURO AV
(SCART) IN
To EURO AV
(SCART) IN
: Signal flow
To audio
input