Filter
Top Products
Playing CDsGetting Started
Getting Started
Getting Started
Getting Started
7
GB
What cords will I need?
EURO-AV (SCART) connecting cord (not supplied)
Hookups
Be sure to make connections firmly to avoid hum and
noise.
pTo connect to a TV and a VCR
Notes
• Do not connect this
player to a video deck.
If you view the pictures
on your TV after
making the connections
shown on the right, a
picture noise may
appear.
• Depending on the TV or amplifier, sound distortion may
occur because the audio output level is high. In this case,
set “AUDIO ATT” in “INITIAL SETUP 2” to “ON” in the
setup display. For details, see page 39.
• You cannot enjoy the picture with S video signal if your TV
is not conformed to the S video signal. Refer to the
instructions supplied with your TV.
• When you set “EURO AV OUT” to “S VIDEO” or “RGB”
under “INITIAL SETUP 3” in the setup display, use the
EURO AV (SCART) connecting cord conformed to each
signal.
• If you want to enjoy the picture with RGB signal via EURO
AV 1 (RGB) connector, set “COMPONENT OUT” in the
“INITIAL SETUP 3” to “OFF,” then set “EURO AV OUT”
to “RGB” in the setup display. For details, see page 40.
• If you cannot view the pictures from a VCR through this
player which is connected to a TV with RGB, set to
…(Audio/Video) on your TV. When you select
(RGB), the TV cannot receive the signal from the VCR.
• If you want to use SmartLink function of a VCR, connect
the VCR to a TV with the connector conformed to
SmartLink function and connect the CD/DVD player to the
TV with another connector.
• When you connect the player to a monitor or projector via
only the COMPONENT VIDEO OUT connectors, do not
select “OFF” in “COMPONENT OUT” under “CUSTOM
SETUP.” If you select “OFF” in this case, the picture may
not appear.
CD/DVD player
TV
z If your TV has no EURO AV (SCART) connectors
You can connect the player to a TV (with audio/video
input jacks) and/or an amplifier using the supplied
audio/video connectiong cord. When connecting the
cords, be sure to match the color-coded cord to the
appropriate jacks on the components: Yellow (video) to
Yellow, Red (right) to Red and White (left) to White.
pTo listen to the sound through TV speakers
pTo listen to the sound through speakers connected
to an amplifier
pIf your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cord (supplied) instead of the video
connecting cord. You will get a better picture.
(Continued)
S VIDEO IN
S VIDEO OUT
Connect
directly
S video cord (supplied)
VCR
CD/DVD
Player
TV
CD/DVD player
TV
VCR
CD/DVD player
LINE OUT
R–AUDIO–L VIDEO
INPUT
AUDIO
R
L
VIDEO
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
TV
CD/DVD player
Amplifier
TV
INPUT
AUDIO
R
L
VIDEO
CD
L
R
LINE OUT
R–AUDIO–L VIDEO
Video connecting cord (supplied)
AV 1
EURO AV
2
EURO AV 1 (RGB)-TV
AV 1
Audio connecting cord (supplied)