Filter
Top Products
51
SETUP SETUP SETUPSETUP MenusSETUP
4:3 Default
Select the default
Screen Mode to
use for 4:3 sources
Wide Zoom Select to enlarge the 4:3 size picture, while
the upper and lower parts of the picture are
condensed to fit the wide screen.
Normal Select to return the 4:3 picture to normal
mode.
Full Select to enlarge the 4:3 picture
horizontally only, to fill the wide screen.
Zoom Select to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Off Select to continue using the current Screen
Mode setting when the channel or input is
changed.
Vertical Center Allows you to move the position of the picture up and
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Press V or v and press
to choose a correction
between +15 and -15 (Zoom mode), and +5 and -5 (Wide
Zoom mode).
Vertical Size Allows you to adjust the vertical size of the picture.
(Available only in Wide Zoom and Zoom modes.)
Press V or v and press
to choose a correction
between +7 and -7.
Option Description
If 4:3 Default is set to
anything but Off, the Screen
Mode setting changes only for
the current channel. When you
change channels (or inputs),
Screen Mode is automatically
replaced with the 4:3 Default
setting. To retain the current
Screen Mode setting as channels
and inputs are changed, set 4:3
Default to Off.
z
HS420.book Page 51 Tuesday, March 30, 2004 10:36 AM