Filter
Top Products
Other Information
72
Model name1[KP-43HT20] Model name2[KP-53HS20/30] Model name3[KP-61HS20/30]
[4-081-143-11 (1)]
I get the same program in the
window picture as in the main
picture
❏ Both may be set to the same channel. Try changing channels in either the main
picture or the window picture.
❏ You may be running all your channels through a cable box. The cable box will
only unscramble one signal at a time, so you cannot use the Twin View feature. If
possible, run a direct cable to your projection TV’s VHF/UHF input. (This will
only work if your cable system provides an unscrambled signal.)
I cannot get anything but TV
channels in my second picture
❏ Be sure the video label has not been set to skip your video inputs. See the Setup
menu on page 63.
Favorite Channel does not
display your choices
❏ Verify that Favorite Channel is set to Manual in the Channel menu. (see
“Favorite Channel” on page 52)
Some video sources do not
appear when you press TV/
VIDEO
❏ Ensure that Video Label is not set to SKIP. (see “Video Label” on page 64)
Problem Possible Remedies