Filter
Top Products
Chapter 2 Names and Functions of Parts
17
2-3 LCD Panel
2-3 LCD Panel
a Image display (color)
In playback and editing operations, this shows the
playback video, clip thumbnail images, and so on.
b Indicators on the back of the LCD panel
There are two indicators, as follows.
"/1 (on/standby) indicator: Lights when the on/standby
switch on the control panel is in the on (") position.
ACCESS indicator: Lights when the disc is being
accessed. If the on/standby switch is set to the 1
position while this indicator is lit, access to the disc is
completed before the unit switches to the standby
state.
Note
While the ACCESS indicator is lit, do not turn off the AC
power switch, disconnect the power cord, or remove the
battery. This could lead to a loss of data from the disc.
1 Status display (monochrome)
a Audio level meters
These show the audio levels for channels 1 to 4 or channels
5 to 8. When the audio level exceeds 0 dB on any channel,
the indicator for that channel lights.
-30
dB
-12
-20
-40
-60
0
CH
- 15
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH-
26
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH-
37
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH-
48 BATT E F
DATA
OVER
VITC
HOURS
AUDIO 625 IMX50 4030
[]
525
48CH 1624 BIT
DVCAM
MINUTES SECONDS FRAMES
COUNTERVIUB VITC ALARM
1 Image display (color)
2 Indicators on the back of the LCD panel
2 Display setting section and WARNING indicator (see page 18)
1 Status display (monochrome) (see page 17)
ACCESS
"/1 indicator
ACCESS indicator
OVER
-30
dB
-12
-20
-40
-60
0
CH
- 15
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH-
26
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH-
37
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH-
48 BATT E F
DATA
VITC
HOURS
AUDIO 625 IMX 50 4030
[]
525
48CH 16 24BIT
DVCAM
MINUTES SECONDS FRAMES
VITCCOUNTERVIUB ALARM
1 Audio level meters
2 Time data display
5 525/625 indicator
3 AUDIO indicators
7 IMX/DVCAM indicator
4 BATT display
6 Disc loaded mark
OVER