Filter
Top Products
Chapter 7 Menus
78
7-3 Extended Menu
7-3 Extended Menu
7-3-1 Items in the Extended Menu
The following tables show the items in the extended menu.
• Item names are the names which appear in the image
display.
An abbreviated name appears in the time data display
section when you press the NEXT button.
• The values in the Settings column are the values which
appear in the time data display section. (The values may
appear in a different format in the image display. In this
case, the image display values are shown in
parentheses.) Underlined values are the factory defaults.
a) This is supported from firmware version 1.4.
Menu items in the 100s, relating to the control panels
Item number Item name Settings
101 SELECTION FOR SEARCH DIAL
ENABLE
Select how the unit enters the shuttle or jog mode.
dial (dial direct)
: Press the SHUTTLE or JOG button or, except during
recording/editing, turn the jog dial or shuttle dial.
key (via search key): Press the SHUTTLE or JOG button.
114 AUDIO MONITOR OUTPUT LEVEL Select whether or not to control the level of the audio signal output from
the AUDIO MONITOR OUT connector with the LEVEL knob for the
PHONES jack.
var (variable)
: Control.
fixed
: Do not control.
121 FRAME PB MODE
a)
Specify the frame mode for variable speed playback.
field
: Field playback
frame: Frame playback. Compared to field playback, frame playback
gives still pictures with higher precision.
142 REPEAT MODE
a)
Put the unit into repeat playback mode, or exit from repeat playback
mode.
off
: Exits from repeat playback mode.
play: Puts the unit into repeat playback mode.
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
215 i.LINK MODE
Select the connection method for the S400 (i.LINK) connector.
AV/C
: Connect with AV/C.
FAM (FAM (PC REMOTE)): Connect with FAM.
Menu items in the 300s, relating to editing operations
Item number Item name Settings
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade
: Fade out and fade in.
Menu items in the 400s, relating to preroll
Item number Item name Settings
401 FUNCTION MODE AFTER CUE-UP Select the state that the unit goes into after a cuing-up operation.
stop
: Stops (the stop mode).
still: Still playback (in jog and shuttle mode).