Filter
Top Products
Chapter 7 Menus
80
7-3 Extended Menu
b) This is supported from firmware version 1.4.
652 UMID SDI VANC LINE Select the line in which UMID is output when menu item 651 is set to “on.”
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (525(U)/525(J) line modes)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line)
, 18 H (18 line) (625 line
mode)
See 7-3-3 “Using UMID Data” (page 84) for more information about
UMID.
657 ESSENCE MARK SDI OUTPUT Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on
: Output.
660 ESSENCE MARK SDI VANC LINE When item 657 is set to “on,” select the line to which to output essence
marks.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (525(U)/525(J) line modes)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line)
, 18 H (18 line) (625 line
mode)
Menu items in the 600s, relating to the time code reader, metadata, and UMID
Item number Item name Settings
Menu items in the 700s, relating to video control
Item number Item name Settings
703 BLANK LINE SELECT Switch blanking of the video output signal on or off for individual lines in the
vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
Sub-item
1 ALL LINE - - -
: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu): Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
2 ... 9 LINE 12 ...
LINE 19
In 525(U)
line mode
Specify blanking for lines 12 to 19.
blnk (blank)
: Carry out blanking.
thru (throu): Switch off blanking.
10 LINE 20 Specify blanking for line 20.
blnk (blank)
: Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
2 ...
10
LINE 12 ...
LINE 20
In 525(J)
line mode
Specify blanking for lines 12 to 20.
blnk (blank)
: Carry out blanking.
thru (throu): Switch off blanking.
11 LINE 21 Specify blanking for line 21.
blnk (blank)
: Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
2 ...
15
LINE 9, 322 ...
LINE 22, 335
In 625 line
mode
Specify blanking for lines 9, 322 to 22, 335.
blnk (blank)
: Carry out blanking.
thru (throu): Switch off blanking.
16 LINE 23 Specify blanking for line 23.
half
: Carry out half-blanking.
thru (throu): Switch off blanking.
705 EDGE SUBCARRIER
REDUCER MODE
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off
: Do not enable.
When playing back a composite signal, set this to “on.”