Sony PDW-V1 DVD Recorder User Manual


 
Chapter 8 Maintenance and Troubleshooting
98
8-3 Alarms
a) With respect to setting of basic menu item 016
b) This appears from firmware version 1.4.
During reception of commands from an external device connected to the S400 (i.LINK)
connector
1)
1) When extended menu item 215 has been set to “AV/C,” and the remote
control switch has been set to “REMOTE.”
a) With respect to setting of basic menu item 016
Disc Damage on, limit, off An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free sparing area.
This disc cannot be recorded. Exchange
the disc.
Non AV Full on, limit, off An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free Non-Real-Time
space.
Insert a different disc with enough free
capacity.
Index File!
b)
on, limit, off An attempt was made to record to a disc
containing an unsupported index file.
Exchange the disc for one that contains
an index file supported by this unit.
Alternatively, format the disc (see page
31).
File System
b)
on, limit, off An attempt was made to record to a disc
with an unsupported file system
It may be possible to play back the disc,
but recording is not possible. Exchange
the disc for one formatted in a file system
supported by this unit. Alternatively,
format the disc (see page 31).
File System
b)
on, limit, off An attempt was made to record to a disc
when its file system was set to inhibit
recording.
Message in time
data display
Display
condition
a)
Description Action
Message in time
data display
Display
condition
a)
Description Action
MAX# SB CLP on, limit, off A command was received to add a sub
clip when the number of registered sub
clips had already reached the upper limit
(300) of the specifications of this unit.
These operations are not possible.
CL OVER DUR on, limit, off A command was received to add a sub
clip when the total duration of sub clips in
the clip list had already reached the
upper limit (24 hours) of the
specifications of this unit.
Non AV Full on, limit, off A command was received to record,
display an E-E picture, record an
essence mark, or add a quick scene
selection sub clip when there was no free
Non-Real-Time space.
Insert a different disc with enough free
capacity.
No Disc! on A recording, playback, search, or other
command was received with no disc
loaded.
Try the operation again after loading a
disc.
No Clip! on, limit A playback or search command was
received for a disc containing no
recorded clips.
These operations are not possible.
Disc Top! on A PREV or reverse high-speed search
command was received with the disc
stopped at the top.
Disc End! on A NEXT or forward high-speed search
command was received with the disc
stopped at the end.