Filter
Top Products
Digital features
22
The Main menu
CAM Setup
This feature allows you to access a pay per view service once you have obtained a Conditional Access
Module (CAM) and a viewing card. Please contact your nearest pay-per-view supplier for details.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM into the socket on the rear of the TV as shown. Take care not to damage the CAM
when inserting.
Note: If you have already attached the door that covers the rear sockets you will have to unscrew and remove this to
gain access to the CAM socket.
3. Insert your viewing card into the CAM.
4. Connect the TV to the mains and switch on.
5. Press the button on the remote control to obtain the Digital Info display.
6. Press the BLUE button to display the Main menu.
7. Press the V or v button to highlight ‘CAM Setup’, then press the OK button to display the set up menu
of the service provider.
For further information regarding the services available, please contact your pay-per-view supplier.
DIG
ITAL
MO
DE
REC
OK
Viewing card
and CAM
NX 13-22.fm Page 22 Wednesday, September 5, 2001 9:30 AM