Filter
Top Products
TV menu system
25
DIGITAL
DIGITAL
MODE
MENU
OK
R
EC
DIGITAL
Using the Features menu
1. Press the MENU button to display the main menu.
2. Press the v button to highlight the icon, then press the b button to highlight ‘Auto Format’.
3. Press the V or v button to select the option you wish to adjust, then press the b button to confirm.
The table below explains the function of each option and which buttons to press for adjustment. Once
adjustment has been finalised, press the OK button to store.
4. Press the MENU button when you wish to remove the menu from the screen.
Option Adjustment/Effect
Auto Format Press V or v button to select between Off or On.
Off: Picture size remains constant irrespective of broadcasting format.
On: Picture size changes to match the broadcasting format. For example, if a
conventional 14:9 broadcast changes to a Wide screen format, the TV switches
formats automatically.
Format Correction
(Only available when On
has been selected in
‘Auto Format’ option
)
Press V or v button to select Off or On.
Off: When 4:3 and 14:9 broadcasts are received, there will be dark areas visible
at each side of the screen.
On: Smart mode is automatically selected when 4:3 and 14:9 broadcasts are
received, thus eliminating the dark areas on each side of the screen.
Sleep Timer Press V or v button to select a period of time before the TV switches itself into
standby mode. This can be up to 90 minutes in 10 minute intervals.
When you wish to return to normal TV operation press the TV button.
AV3 Output Press V or v button to select which input source you wish to output from the AV3
socket. This option allows you to connect a VCR to AV3 and then record whatever
signals are being applied to the other sockets etc. Choose from Ana.TV, Digi.TV,
AV1, AV2, AV3 or AV4.
Ana.TV: Always outputs the tuned analogue TV signal.
Digi.TV: Always outputs the tuned digital TV signal.
AV1: Outputs signals from equipment connected to the rear socket.
AV2: Outputs signals from equipment connected to the rear socket.
AV3: Outputs signals from equipment connected to the / rear socket.
AV4: Outputs signals from equipment connected to the side sockets of the TV.
/
1
2
3
s
3
NX 23-30.fm Page 25 Wednesday, September 5, 2001 9:34 AM