Filter
Top Products
TV menu system
29
Adjusting the picture geometry for an RGB source
DIGITAL
M
O
DE
RE
C
OK
MENU
MODE
R
E
C
OK
MENU
When viewing signals from an RGB source such as a Sony Playstation, it may be necessary to adjust the
picture geometry.
1. Press the button on the remote control until the RGB input from equipment you have connected to
the or socket of the TV is displayed.
2. Press the MENU button to display the main menu.
3. Press the v button to highlight the icon, then press the b button to highlight ‘Auto Tuning’.
4. Press the v button to highlight ‘Manual Set Up’ then press the b button to display the Manual Set Up
menu.
5. Press the v button to highlight ‘RGB Set Up’ then press the b button to display the RGB Set Up menu.
6. Press the b button to select H Centre, then press the V or v button to centralise the picture over a range
of -10 to +10. Press OK button to store new setting.
7. Press the b button to select H Size then press the V or v button to adjust the picture size over a range
of -10 to +10. Press OK button to store, then press the MENU button to remove menu from the screen.
1 2
Use this feature to give a name to each piece of equipment connected to the Audio/Video (AV) sockets on
your TV. These names will be displayed on screen briefly when the equipment is selected.
1. Press the MENU button to display the main menu.
2. Press the v button to highlight the icon, then press the b button to highlight ‘Auto Tuning’.
3. Press the V or v button to highlight ‘AV Preset’ then press the b button to display the AV Preset menu.
4. Press the V or v button to select the AV socket your equipment is connected to (AV1, AV2, AV3 or
AV4).
5. Press the b button to select AUTO FORMAT column, then press the v or v button to select Off or On.
(see ‘Using the Features menu’ for a description of the Auto Format function).
6. Press the b button to select LABEL column.
7. Press the V or v button to display the first character of the name you wish to use, then press the b
button to select.
8. Repeat the procedure until you complete the name, then press the OK button to store.
9. Repeat steps 4 to 8 if you wish to name other equipment connected to the AV sockets, then press the
MENU button to remove the menu from the screen.
Presetting and naming inputs from external equipment
NX 23-30.fm Page 29 Wednesday, September 5, 2001 9:34 AM