Filter
Top Products
Additional information
31
Connecting additional equipment
The following illustration shows how to connect a wide range of equipment to the rear of your TV. Please note that the connecting
cables are not supplied.
1. After you have connected your equipment, press the / button on the remote control until the
correct symbol for your equipment appears on the TV screen (see table below).
Note: to record digital programmes you must connect your VCR to the Scart socket C using a scart lead.
2. Switch on your equipment to view the signal.
3. Press the DIGITAL/ button when you wish to return to normal TV operation.
Connecting a VCR that supports Smartlink
The Smartlink system offers a direct link between the TV and VCR. If you have a Smartlink VCR, please
refer to those instructions for further information.
Note: To operate correctly your VCR must be connected to the C socket of the TV using a fully wired 21 pin scart lead.
Connecting to external audio equipment
Plug in your Hi-Fi system to socket D if you wish to amplify the sound from the TV. The volume level can
still be adjusted using the volume button on the remote control.
Connecting your MD/ DAT player
Plug in your MD/DAT player to socket E.
Connecting a modem
Connect your modem to the F socket and your telephone socket.
On screen symbol Usage
For equipment connected to socket A
For equipment connected to socket B
For equipment connected to socket C
1
2
3
MODE
REC
DIGITAL
DVD
VCR
PlayStation
Hi-Fi
Modem
MD/DAT
C
B
A
D
E
F
NX31-36.fm Page 31 Wednesday, September 5, 2001 9:39 AM