Filter
Top Products
SurfControl Web Filter v5.5 Administrator’s Guide 111
W
EB
F
ILTER
S
ETTINGS
Real-Time Monitor Tab
9
REAL-TIME MONITOR TAB
This tab displays the connection details for the Real-Time Monitor.
Figure 9-9 Real-Time Monitor Settings
The settings are:
• Port Number - This is the port that the Real-Time Monitor connects to the Web Filter service on. The
default number is 5000. This port number must be the same as in the Collector Details dialog box in
the Real-Time Monitor. See page 94 for more details.
• Timeout (seconds) - If the connection to the server is lost, this is the time that the Real-Time Monitor
will try re-connecting to the server before timing out and reporting an error.
• Heartbeat Interval (seconds) - The Web Filter service will send an ‘I’m here’ message to the Real-
Time Monitor. The Real-Time Monitor will then send one back. This setting is the interval between
receiving a message and returning it. If no message is received by the Real-Time Monitor it assumes
that the connection to the Web Filter service has stopped.
• Maximum Clients - The maximum allowed number of Real-Time Monitor connections to the server at
any one time.