Filter
Top Products
- 20 - EN
SEARCH
Make sure ...
•
The unit must be turned on.
•
Insert a tape.
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
•
Zero Return WILL NOT work on a blank tape or
a blank portion of a tape.
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2 Reset the counter to 0:00:00
Press [COUNTER RESET] repeatedly.
3 Begin recording or playback
Press [RECORD] or [PLAY/
KK
].
Press
[STOP/
LL
]
when recording or playback is com-
pleted.
4 To activate “ZERO RETURN” mode
Press [MENU].
Press
[PLAY/
KK
]
or
[STOP/
LL
] to
point to “ZERO RETURN”, then
press [F.FWD/
BB
].
The counter will appear on the TV
screen.
The tape will automatically stop when the counter
returns to 0:00:00. (approx.)
ZERO RETURN
The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTE:
•
Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
In the example below: To watch a program before/
after 2 hour 50 minutes from the present position, in
either direction.
1 Call up “TIME SEARCH”
setting
Press [TIME SEARCH].
2 Enter your desired time
Press
[PLAY/
KK
] or [STOP/
LL
]
until your desired time appears.
(Example: “2:50” stands for 2 hours
50 minutes) You can also use
[TIME SEARCH].
If you wish to cancel the Time
Search at this point, press
[MENU].
3 Begin Time Search
By pressing [REW/
ss
] or [F.FWD/
BB
], the unit will
rewind or fast forward to the specified point.
The time counts down during the search. When the
display shows “0:00”, the tape will start playback
automatically.
TO CANCEL DURING TIME SEARCH
Press [STOP/EJECT
PP NN
] on the unit or
[STOP/
LL
]
.
This will delete the selected time.
TIME SEARCH
TIME SEARCH
2 : 50
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1 Start Picture Search
During playback, press [REW/
ss
] or [F.FWD/
BB
] to
view at a high speed (in forward/reverse).
2 Change searching speed
Press [REW/
ss
] or [F.FWD/
BB
] again to view at
super high speed (in the LP/SLP modes only).
NOTE:
•
Tapes recorded in the SP or LP mode will normally
display a noise bar on the TV screen and the pic-
ture may revert to Black and White.
3 Return to normal speed
Press [PLAY/
KK
].
TIME SEARCH
0 : 10